LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Quest SL >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control System >> TCS/Abs >> Trouble Diagnosis >> CONSULT-II Function >> Active Test >> Operation Procedure

Operation Procedure

  1. Connect the CONSULT-II and CONSULT-II CONVERTER to the data link connector and start the engine.
    CAUTION: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which carry out CAN communication.
  2. Touch "START (NISSAN BASED VHCL)" on the display screen.
  3. Touch "ABS".

    If "ABS" is not indicated, go to "CONSULT-II DATA LINK CONNECTOR (DLC) CIRCUIT ".

  4. Touch "ACTIVE TEST".
  5. The test item selection screen is displayed.
    Fig 1: Displaying SELECT TEST ITEM Screen
    G00740106Courtesy of NISSAN MOTOR CO., U.S.A.
  6. Touch necessary test item.
  7. With the "MAIN ITEM" display shown in reverse, touch "START".
  8. The Active Test screen will be displayed, so conduct the following test.
scientia non olet · About LEMON Manuals