LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Pathfinder LE, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 246 (Engine Control Systems) >> Trouble Diagnosis >> ECM Terminals and Reference Value >> ECM Inspection Table >> Notes

ECM Inspection Table: Notes

WARNING: This page is about a different car, the 2004 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.

Specification data are reference values and are measured between each terminal and ground.

Pulse signal is measured by CONSULT-II.

CAUTION: Do not use ECM ground terminals when measuring input/output voltage. Doing so may result in damage to the ECMs transistor. Use a ground other than ECM terminals, such as the ground.
Fig 1: ECM Inspection Table (1 Of 8)
G00336963Courtesy of NISSAN MOTOR CO., U.S.A.
Fig 2: ECM Inspection Table (2 Of 8)
G00336964Courtesy of NISSAN MOTOR CO., U.S.A.
Fig 3: ECM Inspection Table (3 Of 8)
G00336965Courtesy of NISSAN MOTOR CO., U.S.A.
Fig 4: ECM Inspection Table (4 Of 8)
G00336966Courtesy of NISSAN MOTOR CO., U.S.A.
Fig 5: ECM Inspection Table (5 Of 8)
G00336967Courtesy of NISSAN MOTOR CO., U.S.A.
Fig 6: ECM Inspection Table (6 Of 8)
G00336968Courtesy of NISSAN MOTOR CO., U.S.A.
Fig 7: ECM Inspection Table (7 Of 8)
G00336969Courtesy of NISSAN MOTOR CO., U.S.A.
Fig 8: ECM Inspection Table (8 Of 8)
G00336970Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals