1. Check Refrigerant Pressure Sensor Overall Function

WARNING: This page is about a different car, the 2004 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.

Start engine and warm it up to normal operating temperature.
Turn A/C switch and blower switch ON.
Check voltage between ECM terminal 70 and ground with CONSULT-II or tester.
1. Voltage: 1.0 - 4.0V

OK or NG

OK >> INSPECTION END

NG >> GO TO 2. CHECK REFRIGERANT PRESSURE SENSOR POWER SUPPLY CIRCUIT .

Fig 1: Check Voltage Between ECM Terminal 70 And Ground

Courtesy of NISSAN MOTOR CO., U.S.A.