2. Check Overall Function-II

WARNING: This page is about a different car, the 2004 Nissan Armada. However, it is still accessible from the selected car via links, so may be relevant.

With CONSULT-II

Check "BRAKE SW2" indication in "DATA MONITOR" mode.

Fig 1: Overall Function-II Check With CONSULT-II (1 Of 2)

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 2: Overall Function-II Check With CONSULT-II (2 Of 2)

Courtesy of NISSAN MOTOR CO., U.S.A.

Without CONSULT-II

Check voltage between ECM terminal 101 and ground under the following conditions.

Fig 3: Overall Function-II Check Without CONSULT-II (1 Of 2)

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 4: Overall Function-II Check Without CONSULT-II (2 Of 2)

Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG

OK >>INSPECTION END

NG >>GO TO 7. CHECK STOP LAMP SWITCH POWER SUPPLY CIRCUIT .