LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Murano SL, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System >> DTC P1800: VIAS Control Solenoid Valve >> DTC Confirmation Procedure >> With Consult-II

With Consult-II

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Start engine and let it idle for at least 5 seconds.
  4. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE "
    Fig 1: Displaying "DATA MONITOR" Mode
    G00783000Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals