LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Murano SL, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System >> DTC P0335: CKP Sensor (Pos) >> DTC Confirmation Procedure >> With Consult-II

With Consult-II

  1. Turn ignition switch ON and select "DATA MONITOR" mode with CONSULT-II.
  2. Crank engine for at least 2 seconds and run it for at least 5 seconds at idle speed.
  3. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE "
    Fig 1: DTC Confirmation Procedure With CONSULT-II (P0335)
    G00782449Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals