LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Murano SE, AWD >> Repair and Diagnosis >> Transmission >> Transfer Case >> Trouble Diagnosis For System >> AWD Lock Switch >> Component Inspection

Component Inspection

  1. Turn ignition switch "OFF".
  2. Disconnect AWD lock switch harness connector.
  3. Operate AWD lock switch and check continuity between AWD lock switch harness connector M55 terminals 1 and 3.
    Fig 1: Continuity Chart
    G00770325Courtesy of NISSAN MOTOR CO., U.S.A.
  4. If NG, replace AWD lock switch.
    Fig 2: Checking Continuity Between AWD Lock Switch Harness Connector M55 Terminals 1 And 3
    G00770326Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals