LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Murano SE, AWD >> Repair and Diagnosis >> Transmission >> Transfer Case >> AWD Control Unit >> Removal and Installation >> Removal

Removal and Installation: Removal

  1. Remove instrument driver lower panel. Refer to "INSTRUMENT DRIVER LOWER PANEL ".
  2. Remove fuse block (J/B).
  3. Disconnect AWD control unit connector.
  4. Remove AWD control unit.
    Fig 1: Removing/Installing AWD Control Unit
    G00770352Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals