13. Check Stop Lamp Switch Power Supply Circuit

1. Turn ignition switch OFF.
2. Disconnect stop lamp switch harness connector.
   Fig 1: Disconnect Stop Lamp Switch Harness Connector

   Courtesy of NISSAN MOTOR CO., U.S.A.
3. Check voltage between stop lamp switch terminal 1 and ground with CONSULT-II or tester.
   1. Voltage: Battery voltage 

OK or NG 

1. OK : GO TO 15 .
2. NG : GO TO 14.

Fig 2: Check Stop Lamp Switch Power Supply Circuit

Courtesy of NISSAN MOTOR CO., U.S.A.