LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Frontier Base, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control System - KA24DE >> DTC P0340: CMP Sensor >> DTC Confirmation Procedure >> Procedure For Malfunction B And C >> With CONSULT-II

With CONSULT-II

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
    Fig 1: Scan Tool Display - Data Monitor
    G00854544Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Start engine and run it for at least 2 seconds at idle speed.
  4. If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE .
scientia non olet · About LEMON Manuals