LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Frontier Base, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control System - KA24DE >> DTC P0101: MAF Sensor >> DTC Confirmation Procedure >> Procedure For Malfunction A >> With CONSULT-II

With CONSULT-II

  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
    Fig 1: Scan Tool Display - Data Monitor
    G00856974Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Start engine and warm it up to normal operating temperature.
  4. Run engine for at least 10 seconds at idle speed.
  5. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
scientia non olet · About LEMON Manuals