LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Frontier Base, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control System - KA24DE >> DTC P0132: Ho2S1 >> DTC Confirmation Procedure >> With Consult-II

With Consult-II

  1. Start engine and warm it up to normal operating temperature.
  2. Turn ignition switch OFF and wait at least 5 seconds.
  3. Turn ignition switch ON.
  4. Select "DATA MONITOR" mode with CONSULT-II.
    Fig 1: Scan Tool Display - Data Monitor
    G00857096Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Restart engine and let it idle for 2 minutes.
  6. If 1st trip DTC is detected, go to DIAGNOSTIC PROCEDURE .
scientia non olet · About LEMON Manuals