Inspection After Installation
- Check that the accelerator pedal moves smoothly within the specified ranges.
- Adjustable accelerator pedal - total pedal applied stroke: 48.3 mm (1.90 in)
- Adjustable accelerator pedal - total pedal adjustment travel: 73.2 mm (2.88 in)
- Check that the accelerator pedal smoothly returns to the original position.
- Perform an electrical inspection of the accelerator pedal position sensor. Refer to
"DTC P2138 APP SENSOR
".CAUTION: When the harness connector of the accelerator pedal position sensor is disconnected, perform "Accelerator Pedal Released Position Learning". Refer to "Accelerator Pedal Released Position Learning ".