Rear Power Vent Window Switch Circuit Check

CHECK REAR POWER VENT WINDOW SWITCH OPERATION

Turn ignition switch OFF.
Disconnect rear power vent window switch.
Check continuity between rear power vent window switch terminals 1, 3 and 4.

CONTINUITY REFERENCE CHART

Connector	Terminal		Condition	Continuity
	(+)	(-)
R103	3	1	Rear power vent window switch is pressed OPEN.	Yes
	4	1	Rear power vent window switch is pressed CLOSE.	Yes

OK or NG

OK: GO TO 2.
NG: Replace rear power vent window switch.

Fig 1: Checking Continuity Between Rear Power Vent Window Switch Terminals 1, 3 And 4

G03496670

Courtesy of NISSAN MOTOR CO., U.S.A.

CHECK REAR POWER VENT WINDOW SWITCH CIRCUIT HARNESS CONTINUITY
Check continuity between rear power vent window switch connector R103 terminal 1 and around.
1. 1 (B) - Ground: Continuity should exist.
OK or NG
1. OK: Rear power vent window switch circuit harness OK.
2. NG: Repair or replace harness.
Fig 2: Checking Continuity Between Rear Power Vent Window Switch Connector R103 Terminal 1 And Ground
Courtesy of NISSAN MOTOR CO., U.S.A.