LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Armada LE, 4WD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> DTC P1065: ECM Power Supply >> DTC Confirmation Procedure

DTC Confirmation Procedure

NOTE: If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

WITH CONSULT-II 

  1. Turn ignition switch ON and wait at least 1 second.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Start engine and let it idle for 1 second.
  4. Turn ignition switch OFF, wait at least 10 seconds and then turn ON.
  5. Repeat steps 3 and 4 for 4 times.
  6. If 1st trip DTP is detected, go to Diagnostic Procedure  .

WITH GST 

Follow the procedure "WITH CONSULT-II" above.

scientia non olet · About LEMON Manuals