Front Power Window Motor RH Circuit Check
- CHECK FRONT POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH OUTPUT SIGNAL
- Connect front power window and door lock/unlock switch RH.
- Turn ignition switch ON.
- Check voltage between front power window and door lock/unlock switch RH connector D105 terminal 8, 9 and around.
VOLTAGE REFERENCE CHARTConnector Terminals (Wire color) Condition Voltage (V) (Approx.) (+) (-) D105 9 (G) Ground UP 0 DOWN Battery voltage 8 (L) UP Battery voltage DOWN 0 OK or NG
- OK: GO TO 2.
- NG: Replace front power window and door lock/unlock switch RH.
- CHECK FRONT POWER WINDOW MOTOR RH CIRCUIT
- Turn ignition switch OFF.
- Disconnect front power window motor RH and front power window and door lock/unlock switch RH.
- Check continuity between front power window and door lock/unlock switch RH connector D105 terminals 8, 9 and front power window motor RH connector D104 terminals 1.2.
- 8 (L) - 2 (L): Continuity should exist.
- 9 (G) -1 (G): Continuity should exist.
OK or NG
- OK: Replace front power window motor RH.
- NG: Repair or replace harness.