Front Power Window Motor LH Circuit Check
- CHECK MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH OUTPUT SIGNAL
- Turn ignition switch ON.
- Check voltage between main power window and door lock/unlock switch connector D7 terminal 8, 11 and ground.
VOLTAGE REFERENCE CHARTConnector Terminals (Wire color) Condition Voltage (V) (Approx.) (+) (-) D7 8 (G/R) Ground UP Battery voltage DOWN 0 11 (G/W) UP 0 DOWN Battery voltage OK or NG
- OK: GO TO 2.
- NG: Replace main power window and door lock/unlock switch.
- CHECK POWER WINDOW MOTOR CIRCUIT
- Turn ignition switch OFF.
- Disconnect main power window and door lock/unlock switch and front power window motor LH.
- Check continuity between main power window and door lock/unlock switch connector D7 terminal 8, 11 and front power window motor LH connector D9 terminal 1, 2.
- 8 (G/R) - 2 (G/R): Continuity should exist.
- 11 (G/W) -1 (G/W): Continuity should exist.
OK or NG
- OK: Replace front power window motor LH.
- NG: Repair or replace harness.