LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima SE, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Engine Control System - 2.5L) >> Basic Service Procedure >> Idle Speed and Ignition Timing Check >> Ignition Timing >> Method A

Method A

WARNING: This page is about a different variant/trim than selected.
  1. Slide the harness protector off the ignition coil No. 1 to clear the wires.
  2. Attach timing light to the wires.
  3. Check ignition timing.
    Fig 1: Attaching Timing Light To Wires
    G02884085Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals