LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima SE, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control System - 3.5L >> DTC P1128: Throttle Control Motor >> DTC Confirmation Procedure >> With Consult-II

With Consult-II

  1. Turn ignition switch ON and wait at least 2 seconds.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Start engine and let it idle for 5 seconds.
  4. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
    Fig 1: CONSULT-II Diagnosis Function Display
    G02885723Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals