LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima SE, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control System - 3.5L >> DTC P0134, P0154: Ho2S1 >> Overall Function Check >> With GST

With GST

  1. Start engine and warm it up to normal operating temperature.
  2. Set voltmeter probes between ECM terminal 91 [HO2S1 (B1) signal] or 92 [HO2S1 (B2) signal] and ground.
  3. Check the following with engine speed held at 2, 000 RPM constant under no load.
    • The voltage does not remain in the range of 0.2 to 0.4V.
  4. If NG, go to "DIAGNOSTIC PROCEDURE ".
    Fig 1: Identifying ECM Connector Terminal
    G02885398Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals