MAINSHAFT End Play: Notes
- When adjusting mainshaft end play, select adjusting shim for mainshaft rear bearing. To select adjusting shim, measure clearance "M" between transaxle case and mainshaft rear bearing.
- Calculate dimension "P" (thickness of adjusting shim) using the following procedure to satisfy specification of end play for mainshaft rear bearing.
End play : 0 - 0.06 mm (0 - 0.0024 in)
Dimension "P" = "M" + End play
"P" : Thickness of adjusting shim
"M" : Distance between mainshaft rear bearing and transaxle case