LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Automatic Transaxle) >> On-Vehicle Service >> Revolution Sensor Replacement

Revolution Sensor Replacement

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect electrical connector.
  2. Remove revolution sensor from A/T.
  3. Reinstall any part removed.
    • Always use new sealing parts. 
      Fig 1: Removing Revolution Sensor From A/T
      G02886844Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals