LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> Altima Base, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control System - 2.5L >> DTC P1572: ASCD Brake Switch >> DTC Confirmation Procedure >> With Consult-II

With Consult-II

  1. Start engine.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Drive the vehicle for at least 5 consecutive seconds under the following condition.
    Vehicle Driving Conditions

    VHCL SPEED SE More than 30 km/h (19 MPH)
    Selector lever Suitable position

    If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".

    If DTC is not detected, go to the following step.

  4. Drive the vehicle for at least 5 consecutive seconds under the following condition.
    Fig 1: Vehicle Driving Conditions
    G02884835Courtesy of NISSAN MOTOR CO., U.S.A.
  5. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".