Diagnostic Procedure

INSPECTION START
WITH CONSULT-II
1. Turn ignition switch ON.
2. Select "SELF DIAG RESULTS" mode with CONSULT-II.
3. Touch "ERASE".
4. Preform DTC Confirmation Procedure.
  See DTC CONFIRMATION PROCEDURE .
5. Is the 1st trip DTC P0605 displayed again?
WITH GST
1. Turn ignition switch ON.
2. Select MODE 4 with GST.
3. Touch "ERASE".
4. Preform DTC Confirmation Procedure.
  See DTC CONFIRMATION PROCEDURE .
5. Is the 1st trip DTC P0605 displayed again?
Yes or No
1. Yes : GO TO 2.
2. No : INSPECTION END
REPLACE ECM
1. Replace ECM.
2. Preform initialization of NVIS (NATS) system and registration of all NVIS (NATS) ignition key IDs. Refer to "NVIS (NISSAN VEHICLE IMMOBILIZER SYSTEM - NATS) ".
3. Preform "ACCELERATOR PEDAL RELEASED POSITION LEARNING ".
4. Preform "THROTTLE VALVE CLOSED POSITION LEARNING ".
5. Preform "IDLE AIR VOLUME LEARNING ".
1. >> INSPECTION END