Consult-II Main Function: Notes
CONSULT-II can display each diagnostic item using the diagnostic test modes shown following.
FUNCTION CHART
| Diagnostic test mode | Function | Reference |
|---|---|---|
| SELF-DIAGNOSTIC RESULTS | Self-diagnostic results can be read and erased quickly. | "SELF-DIAGNOSIS PROCEDURE" |
| DATA MONITOR | Input/Output data in the ABS actuator and electric unit (control unit) can be read. | "DATA MONITOR PROCEDURE" |
| CAN DIAG SUPPORT MNTR | The results of transmit/receive diagnosis of communication can be read. | "CAN COMMUNICATION " |
| ACTIVE TEST | Diagnostic Test Mode in which CONSULT-II drives some actuators apart from the ABS actuator and electric unit (control unit) and also shifts some parameters in a specified range. | "ACTIVE TEST PROCEDURE" |
| FUNCTION TEST | Conducted by CONSULT-II instead of a technician to determine whether each system is "OK" or "NG". | - |
| ECU PART NUMBER | ABS actuator and electric unit (control unit) part number can be read. | - |