LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2004 >> 350Z 2D Convertible, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> 2004 - Engine Control System - Component Testing - Early Roadster >> ASCD Brake Switch >> Component Inspection >> ASCD Brake Switch

ASCD Brake Switch

  1. Turn ignition switch OFF.
  2. Disconnect ASCD brake switch harness connector.
  3. Check harness continuity between ASCD brake switch terminals 1 and 2 under the following conditions.
    CONTINUITY SPECIFICATIONS

    Condition Continuity
    When brake pedal is fully released. Should exist.
    When brake pedal is depressed. Should not exist.

    If NG, adjust ASCD brake switch installation, refer to ADJUSTMENT , and perform step 3 again.

    Fig 1: Checking Harness Continuity Between ASCD Brake Switch Terminals 1 And 2
    G03353197Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals