Setting SRT Codes (Using Generic Scan Tool)

To set all SRT codes as complete, drive vehicle according to driving pattern shown in illustration. See Fig 1-Fig 5 . Perform driving procedure one or more times. If driving procedure is interrupted, repeat procedure. On A/T models, operate vehicle with shift lever in "D" position and overdrive turned on. On M/T models, operate vehicle normally, shifting at normal speeds.

Fig 1: Driving Pattern (1 Of 5)

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 2: Driving Pattern - ULEV (2 Of 5)

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 3: Driving Pattern - ULEV (3 Of 5)

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 4: Driving Pattern - SULEV (4 Of 5)

Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 5: Driving Pattern - SULEV (5 Of 5)

Courtesy of NISSAN MOTOR CO., U.S.A.