LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Standard >> Repair and Diagnosis >> Transmission >> Manual Transaxle (RS5F51A) >> Final Drive >> Disassembly and Assembly >> Disassembly

Disassembly and Assembly: Disassembly

  1. Remove the mounting bolts and then separate the final gear from the differential case.
  2. Remove speedometer drive gear.
  3. Using Tool and puller, remove differential side bearing (clutch housing side) as shown.
    Fig 1: Removing Differential Side Bearing Using Tool And Puller
    G01298582Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Using Tool and puller, remove differential side bearing (transaxle case side) as shown.
    Fig 2: Removing Differential Side Bearing
    G01298583Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Using a pin punch, pull out lock pin and pinion mate shaft as shown.
    Fig 3: Pulling Out Lock Pin And Pinion Mate Shaft Using Pin Punch
    G01298584Courtesy of NISSAN MOTOR CO., U.S.A.
  6. Rotate pinion mate gears, and remove pinion mate gears, pinion mate thrust washers, side gears, and side gear thrust washers from differential case.
scientia non olet · About LEMON Manuals