LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 375 (Manual HVAC System) >> Trouble Diagnosis >> Consult-II >> CONSULT-II Basic Operation

CONSULT-II Basic Operation

WARNING: This page is about a different car, the 2004 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: If CONSULT-II is used with no connection of CONSULT-II CONVERTER, malfunctions might be detected in self-diagnosis depending on control unit which carry out CAN communication.
  1. With the ignition switch OFF, connect CONSULT-II and "CONSULT-II converter"to the data link connector, and turn the ignition switch ON.
    Fig 1: Identifying Data Link Connector Location
    G00342039Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Touch "START (NISSAN BASED VHCL)".
    Fig 2: CONSULT-II Display
    G00342040Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Touch "BCM"on "SELECT SYSTEM"screen. If "BCM"is not indicated, go toCONSULT-II DATA LINK CONNECTOR (PLC) CIRCUIT in GENERAL INFORMATION - TITAN article in GENERAL INFORMATION. .
    Fig 3: CONSULT-II Display
    G00342041Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals