LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 367 (2004 - Engine Control System - Coupe) >> ASCD Brake Switch >> Component Inspection >> ASCD Brake Switch

ASCD Brake Switch

WARNING: This page is about a different car, the 2004 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF.
  2. Disconnect ASCD brake switch harness connector.
  3. Check harness continuity between ASCD brake switch terminals 1 and 2 under the following conditions.
    Fig 1: ASCD Brake Switch Component Inspection
    G00720496Courtesy of NISSAN MOTOR CO., U.S.A.
    Fig 2: ASCD Brake Switch Test Parameters
    G00720495Courtesy of NISSAN MOTOR CO., U.S.A.

    If NG, adjust ASCD brake switch installation, refer to "BRAKE PEDAL ", and perform step 3 again.

scientia non olet · About LEMON Manuals