LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 366 (Propeller Shaft) >> Front Propeller Shaft >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2004 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.
  1. Put matching marks on the front propeller shaft flange yoke and the companion flange of the front final drive as shown.
    NOTE: For matching marks, use paint. Never damage the flange yoke and companion flange of the front final drive.
  2. Remove the bolts and then remove the front propeller shaft from the front final drive and transfer.
Fig 1: Puting Matching Marks On The Front Propeller Shaft Flange Yoke And The Companion Flange
G00728456Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals