LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2074 (Seats) >> Front Seat >> Seatback Assembly >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2007 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. Bend both top corners inward (one at a time) to release the top hooks (A).
  2. Shift the seatback finisher to the Left and Right to release the middle hooks (B).
  3. Separate the trim clips (C) from the seatback frame to remove the seatback finisher.
    Fig 1: Removing/Installing Seatback Assembly
    G04907812Courtesy of NISSAN MOTOR CO., U.S.A.
  4. Remove the bolts (2 for each side) and seatback assembly.
  5. Remove the seatback board from the back of the seatback.
scientia non olet · About LEMON Manuals