LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2074 (Seats) >> Front Seat >> Seat Cushion >> Removal And Installation >> Notes

Removal And Installation: Notes

WARNING: This page is about a different car, the 2007 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Always replace passenger seat cushion as an assembly.
  • Front passenger seat is equipped with an Occupant Classification System sensor and control module. Do not disassemble front passenger seat cushion assembly or remove the trim as this will affect the Occupant Classification System calibration.
  • When removed, the passenger seat cushion must always be placed pan side UP to prevent damage.
  • During installation, the wire harness clips must be reinstalled in the holes they were originally in. Do not add additional clips.
  • The Occupant Classification System control module can only be replaced as part of the seat cushion assembly.
scientia non olet · About LEMON Manuals