Disassembly and Assembly: Disassembly
WARNING: This page is about a different car, the 2007 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Do not disassemble pump body. Replace as an assembly.
NOTE:
Mount the oil pump in a soft jawed vise as necessary.
- Remove nut, washer and pulley from drive shaft.
- Remove the following from the power steering oil pump:
- Union bolt, washers, and joint.
- Bolts and bracket.
- Bolts and suction pipe.
- Suction pipe O-ring.