BCM (Body Control Module)
WARNING: This page is about a different car, the 2007 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
The BCM (1), which is located near the front pillar LH (2), is shown in illustration with the instrument panel removed. This BCM reads the air pressure signal received by the remote keyless entry receiver, and controls the combination meter warning lamp and the buzzer operations as shown below. It also has a judgement function to detect a system malfunction.
WARNING LAMP SPECIFICATIONS
| Condition | Warning lamp | Buzzer |
|---|---|---|
| Less than 193 kPa (2.0 kg/cm2 , 28 psi) [Flat tire] | ON | OFF |
| Less than 121 kPa (1.23 kg/cm2
, 17.5 psi) [Flat tire] (With PAX Run Flat tire and wheel) |
Flash (Twice per second) | ON (10 seconds after ignition switch ON) |
| System malfunction | After key ON, flashes once per second for 1 minute, then stays ON | OFF |
| System normal | On for 1 second after ignition ON | OFF |