Removal and Installation: Installation

WARNING: This page is about a different car, the 2007 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.

Installation is in the reverse order of removal.

When installing stabilizer bar, make sure that the stabilizer clamps are facing in the correct direction as shown in illustration.

Fig 1: Identifying Stabilizer Bar Clamp Facing Direction
Courtesy of NISSAN MOTOR CO., U.S.A.
Make sure that slit in stabilizer bushing is in the position as shown in illustration.
Lubricate the inner and outer surfaces of the stabilizer bushing using a silicone lubricant.

Fig 2: Identifying Slit And Bushing
Courtesy of NISSAN MOTOR CO., U.S.A.
Install stabilizer bar with ball joint socket properly placed as shown in illustration.
When installing wheel and tire, refer to "ROTATION ".

Fig 3: Identifying Proper Position Of Stabilizer Bar With Ball Joint Socket
Courtesy of NISSAN MOTOR CO., U.S.A.