LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 2058 (Automatic Transmission) >> DTC P0825 Lever Switch Circuit >> DTC Confirmation Procedure >> With Consult-II

With Consult-II

WARNING: This page is about a different car, the 2007 Nissan Quest. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch "ON". (Do not start engine.)
  2. Select "DATA MONITOR" mode for "TRANSMISSION" with CONSULT-II.
  3. Set overdrive control switch to "OFF" position.
  4. Wait for at least 30 consecutive seconds.
  5. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
    Fig 1: CONSULT-II Function Screen Display - Select System
    G04899603Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals