Diagnostic Procedure

WARNING: This page is about a different car, the 2006 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

CHECK CAN COMMUNICATION CIRCUIT
With CONSULT-II
1. Turn ignition switch "ON" and start engine.
2. Select "SELF-DIAG RESULTS" mode for "A/T" with CONSULT-II.
Is any malfunction of the "CAN COMM CIRCUIT" indicated?

YES : Print out CONSULT-II screen, GO TO LAN information.

Refer to LAN-3, "Precautions When Using CONSULT-II"

NO : INSPECTION END

Fig 1: CONSULT II Display - Self-Diag Results
Courtesy of NISSAN MOTOR CO., U.S.A.