Check Before Engine is Started

WARNING: This page is about a different car, the 2006 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

CHECK AT CHECK INDICATOR LAMP
1. Park vehicle on level surface.
2. Move selector lever to "P" position.
3. Turn ignition switch to "OFF" position and wait at least 10 seconds.
4. Turn ignition switch to "ON" position. (Do not start engine.)
Does AT CHECK indicator lamp light up for about 2 seconds?

YES:
1. Turn ignition switch to "OFF" position.
2. Carry out the self-diagnostics and record all NG items on the diagnostic worksheet. Refer to "CONSULT-II SETTING PROCEDURE ".
3. Go to "CHECK AT IDLE ".
NO: Stop the road test and go to "AT CHECK INDICATOR LAMP DOES NOT COME ON ".