Diagnostic Procedure

WARNING: This page is about a different car, the 2006 Nissan Titan. However, it is still accessible from the selected car via links, so may be relevant.

CHECK CAN COMMUNICATION CIRCUIT
With CONSULT-II
1. Turn ignition switch "ON" and start engine.
2. Select "SELF-DIAG RESULTS" mode for "A/T" with CONSULT-II.
Is any malfunction of the "CAN COMM CIRCUIT" indicated?

YES: Print out CONSULT-II screen, GO TO LAN System article. Refer to "PRECAUTIONS WHEN USING CONSULT-II ".

NO: INSPECTION END

Fig 1: CONSULT II Display - Self-Diag Results
Courtesy of NISSAN MOTOR CO., U.S.A.