LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1606 (Brake System) >> Brake Pedal >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2005 Nissan Frontier. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Do not deform the brake tube.
CAUTION:
  • Do not disassemble the brake pedal assembly.
  • Avoid damage from dropping the brake pedal assembly during handling.
  • Keep the brake pedal assembly away from water.
  1. Remove the lower driver instrument panel. Refer to "REMOVAL AND INSTALLATION ".
  2. Remove the stop lamp switch and ASCD switch from the pedal assembly.
  3. Remove snap pin and clevis pin from the clevis of the brake booster.
  4. Remove mounting nuts and the pedal assembly.
    • Temporarily install the nuts by hand to support the booster.
scientia non olet · About LEMON Manuals