LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1448 (Power Supply, Ground & Circuit Elements) >> IPDM E/R (Intelligent Power Distribution Module Engine Room) >> CONSULT-II Function (IPDM E/R) >> Active Test >> Operation Procedure

Operation Procedure

WARNING: This page is about a different car, the 2005 Infiniti FX45 and 2005 Infiniti FX35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Touch "ACTIVE TEST" on "SELECT DIAG MODE" screen.
  2. Touch item to be tested.
  3. Touch "START", and confirm its operation.
  4. Touch "STOP" while testing to stop the operation.
    TEST ITEM DESCRIPTION

    Test item CONSULT-II screen display Description
    Tail lamp operation TAIL LAMP With a certain ON-OFF operation, the tail lamp relay can be operated.
    Rear window defogger operation REAR DEFOGGER With a certain ON-OFF operation, the rear window defogger relay can be operated.
    Front wiper (HI, LO) operation FRONT WIPER With a certain operation (OFF, HI ON, LO ON), the front wiper relay (Lo, Hi) can be operated.
    Cooling fan operation MOTOR FAN With a certain operation (1, 2, 3, 4), the cooling fan can be operated.
    Lamp (HI, LO, FOG) operation LAMPS With a certain operation (OFF, HI ON, LO ON, FOG ON), the lamp relay (Lo, Hi, Fog) can be operated.
    Cornering lamp operation CORNERING LAMP(1) -
    Horn operation HORN With a certain ON-OFF operation, the horn relay can be operated.
    (1) This item is displayed, but cannot be tested.
scientia non olet · About LEMON Manuals