Trunk Lid Opener Actuator Check

CHECK TRUNK LID OPENER
Check trunk lid opener operation with trunk lid opener switch.

NOTE: First check trunk lid opener cancel lever position.

Does trunk lid open?

Yes : GO TO 2.

No : Check trunk lid opener actuator and the circuit.
CHECK TRUNK LID OPENER ACTUATOR OPERATION
With CONSULT-II
1. Select "ACTIVE TEST" in "MULTI REMOTE ENT" with CONSULT-II
2. Select "TRUNK OUTPUT" and touch "ON".
  
  Fig 1: Checking Trunk Lid Opener Actuator Operation With CONSULT-II
  Courtesy of NISSAN MOTOR CO., U.S.A.
NOTE: If CONSULT-II is not available, skip this procedure and go to the next step.

OK or NG

OK : Trunk lid opener actuator circuit is OK.

NG : GO TO 3.
CHECK TRUNK LID OPENER ACTUATOR CIRCUIT
1. Disconnect smart entrance control unit harness connector.
2. Apply ground to smart entrance control unit harness connector terminal 12.
  
  Fig 2: Checking Trunk Lid Opener Actuator Circuit
  Courtesy of NISSAN MOTOR CO., U.S.A.
Refer to "FIG. 1 ".

Does trunk lid open?

Yes : Replace smart entrance control unit.

No : Check harness for open or short between smart entrance control unit and trunk lid opener actuator.