LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Standard >> Repair and Diagnosis (Single Page) >> Engine Performance >> Testing & Diagnosis >> Engine Controls - Self-Diagnostics (Qr25DE) >> Diagnostic Tests >> DTC P0122: Throttle Position Sensor 2 Circuit Low Input & DTC P0123: Throttle Position Sensor 2 Circuit High Input >> DTC Confirmation Procedure

DTC Confirmation Procedure

NOTE: If DTC confirmation procedure has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

Before performing the following procedure, confirm that battery voltage is more than 10 volts at idle. For DTC confirmation procedure, see Fig 1 .

Fig 1: DTCs P0122 & P0123 Confirmation Procedure
G00256038Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals