LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 845 (Parking Brake Control) >> Parking Brake Control >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2003 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove front kicking plate (driver side).
  2. Remove front body side welt (driver side).
  3. Remove instrument lower panel (driver side). Refer to INSTRUMENT PANEL ASSEMBLY .
  4. Remove dash side finisher (driver side).
  5. Remove side ventilator assembly (Left). Refer to INSTRUMENT PANEL ASSEMBLY .
  6. Remove relay box stay fixing screw.
  7. Remove parking brake switch connector.
  8. Remove adjusting nut.
  9. Remove device assembly bolt, nut and remove device assembly from the vehicle.
  10. Remove center console. Refer to CENTER CONSOLE ASSEMBLY .
  11. Remove front cable mounting bolts, nuts and remove front cable from the vehicle.
  12. Remove center muffler. Refer to EXHAUST SYSTEM .
  13. Remove propeller shaft with AWD model. Refer to REAR PROPELLER SHAFT .
  14. Remove disc rotors. Refer to REMOVAL & INSTALLATION .
  15. Remove rear cable from the toggle lever.
  16. Remove right and left rear cables mounting nuts, bolts, and remove right and left rear cable assembly from the vehicle.
scientia non olet · About LEMON Manuals