LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 844 (Brake System) >> Brake Master Cylinder >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2003 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain brake fluid. Refer to DRAIN AND REFILL .
  2. Remove air cleaner and air duct. Refer to AIR CLEANER AND AIR DUCT .
  3. Disconnect harness connectors for fluid level sensor and pressure sensor (VDC model only).
  4. Using a flare nut wrench, disconnect master cylinder assembly and brake tube.
  5. Remove master cylinder assembly nut, remove sub tank assembly bolt and remove master cylinder assembly from vehicle. Refer to REMOVAL AND INSTALLATION .
scientia non olet · About LEMON Manuals