LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 844 (Brake System) >> Brake Booster >> Removal and Installation >> Removal

Removal and Installation: Removal

WARNING: This page is about a different car, the 2003 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Be careful not to deform or bend brake piping while removing and installing the brake booster.
  • Replace clevis pin if it is damaged.
  • Be careful not to damage brake booster stud bolt threads. If brake booster is tilted or inclined during installation, the dash panel may damage the threads.
  • Attach the check valve in the correct orientation.
  1. Remove brake master cylinder. Refer to BRAKE MASTER CYLINDER .
  2. Remove cowl top cover.
  3. Remove vacuum hose from the brake booster. Refer to VACUUM LINES .
  4. Remove the brake pedal snap pin and clevis pin from inside the vehicle.
  5. Remove brake tube bracket from dash panel.
  6. Remove nuts from the brake booster and brake pedal assembly.
  7. Remove brake booster assembly from the dash panel.
scientia non olet · About LEMON Manuals