LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 593 (Manual Transmission - Coupe) >> Transmission Assembly >> Disassembly and Assembly >> Disassembly >> Shift Control Components

Shift Control Components

WARNING: This page is about a different car, the 2005 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install adapter setting plate to adapter plate, and then secure adapter setting plate in a vise.
    1. Tool number: ST224490000 ( - ) 
    Fig 1: Securing Adapter Setting Plate In Vise
    G02334350Courtesy of NISSAN MOTOR CO., U.S.A.
  2. Remove baffle plate mounting bolts and baffle plate from adapter plate.
    NOTE: Mounting bolts are installed both from the front side and the reverse side of adapter plate.
    Fig 2: Removing Baffle Plate Mounting Bolts And Baffle Plate
    G02334351Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Remove magnet from adapter plate.
  4. Drive out retaining pin using a pin punch [6 mm (0.24 in) dia.], and remove striking lever and striking rod.
    Fig 3: Removing Retaining Pin , Striking Lever And Striking Rod
    G02334352Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Remove check ball plugs, check ball springs and check balls from adapter plate.
    Fig 4: Removing Check Ball Plugs, Check Ball Springs And Check Balls
    G02334353Courtesy of NISSAN MOTOR CO., U.S.A.
  6. Remove 3rd-4th control lever mounting bolts and 3rd-4th control lever from adapter plate.
    Fig 5: Removing 3rd-4th Control Lever Mounting Bolts And 3rd-4th Control Lever
    G02334354Courtesy of NISSAN MOTOR CO., U.S.A.
  7. Remove shifter cap from 3rd-4th control lever.
  8. Remove check ball plug, check ball spring and check ball from adapter plate.
    Fig 6: Removing Check Ball Plug, Check Ball Spring And Check Ball
    G02334355Courtesy of NISSAN MOTOR CO., U.S.A.
  9. Drive out retaining pin using a pin punch [6mm (0.24in) dia.], and remove 3rd-4th fork rod bracket and 3rd-4th fork rod.
    Fig 7: Removing Retaining Pin, 3rd-4th Fork Rod Bracket And 3rd-4th Fork Rod
    G02334356Courtesy of NISSAN MOTOR CO., U.S.A.
  10. Drive out retaining pin using a pin punch [6 mm (0.24 in) dia.], and remove 3rd-4th fork rod (reversal side) and 3rd-4th shift fork.
    Fig 8: Removing Retaining Pin , 3rd-4th Fork Rod (Reversal Side) Bracket And 3rd-4th Fork Rod
    G02334357Courtesy of NISSAN MOTOR CO., U.S.A.
  11. Remove check balls and interlock pin from adapter plate.
    Fig 9: Removing Check Balls And Interlock Pin
    G02334358Courtesy of NISSAN MOTOR CO., U.S.A.
  12. Drive out retaining pin using a pin punch [6 mm (0.24 in) dia.], and remove 1st-2nd fork rod and 1st-2nd shift fork.
    Fig 10: Removing Retaining Pin, 1st-2nd Fork Rod And 1st-2nd Shift Fork
    G02334359Courtesy of NISSAN MOTOR CO., U.S.A.
  13. Remove interlock plunger and interlock pin from adapter plate.
    Fig 11: Removing Interlock Plunger And Interlock Pin
    G02334360Courtesy of NISSAN MOTOR CO., U.S.A.
  14. Drive out retaining pin using a pin punch [6 mm (0.24 in) dia.], and remove reverse fork rod and reverse shift fork.
    Fig 12: Removing Retaining Pin, Reverse Fork Rod And Reverse Shift Fork
    G02334361Courtesy of NISSAN MOTOR CO., U.S.A.
  15. Remove check balls from adapter plate.
    Fig 13: Removing Check Balls From Adapter Plate
    G02334362Courtesy of NISSAN MOTOR CO., U.S.A.
  16. Remove 5th-6th control lever mounting bolts, and 5th-6th control lever from adapter plate.
    Fig 14: Removing 5th-6th Control Lever Mounting Bolts And 5th-6th Control Lever
    G02334363Courtesy of NISSAN MOTOR CO., U.S.A.
  17. Drive out retaining pin using a pin punch [6 mm (0.24 in) dia.], and remove 5th-6th fork rod and 5th-6th fork rod bracket.
    Fig 15: Removing Retaining Pin, Remove 5th-6th Fork Rod And 5th-6th Fork Rod Bracket
    G02334364Courtesy of NISSAN MOTOR CO., U.S.A.
  18. Drive out retaining pin using a pin punch [6 mm (0.24 in) dia.], and remove 5th-6th fork rod (reversal side) and 5th-6th shift fork.
    Fig 16: Removing Retaining Pin, Remove 5th-6th Fork Rod (Reversal Side) And 5th-6th Fork Rod Bracket
    G02334365Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals