LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 524 (Engine Control System - Sedan) >> DTC P1212: TCS Communication Line >> DTC Confirmation Procedure >> With Consult-II

With Consult-II

WARNING: This page is about a different car, the 2005 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Start engine and let it idle for at least 10 seconds.
  4. If 1st trip DTC is detected, go to "Diagnostic Procedure "
    Fig 1: Identifying Data Monitor Display
    G02348815Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals