Inspection 14 Can Communication System
WARNING: This page is about a different car, the 2004 Infiniti M45. However, it is still accessible from the selected car via links, so may be relevant.
- CHECK CONNECTOR
- Turn ignition switch OFF, disconnect the VDC/TCS/ABS control unit connector, and check the terminal for deformation, disconnection, looseness, and so on. If there is a malfunction, repair or replace the terminal.
- Reconnect connector to perform self-diagnosis.
Is "CAN COMM CIRCUIT" displayed in the self-diagnosis display items?
- YES: Print out the self-diagnostic results, and refer to CAN COMMUNICATION UNIT .
- NO: Connector terminal connection is loose, damaged, open, or shorted.